Safety first! To prevent any accidents, ensure that your pressure washer is turned off and unplugged from its power source.
Learn how to easily replace the reel on your Evolution pressure washer with this step-by-step guide. You only need Torx 25 and one flathead screwdriver, or similar tools.
Hose reel, including crank and swivel (EV01): SKU: 902-106-01
1. Remove screws
Use torx T25 to unscrew screws a) and b).
2. Remove handle
3. Disconnect internal hose
a) Use a flathead screwdriver or similar, to tilt out the U-pin.
b) Pull the internal house out of the reel
4. Unlock reel
Put the reel in unlock position
5. Replace reel
Lift the old reel and replace it with a new reel.
6. Reassembly
a) Install the internal hose and secure it with U-pin.
b) Install handle.
c) Secure the handle with two screws.
