Article
The Breaker trips while using the High Pressure Washer
When using an AVA High Pressure Washer, ensure that the voltage is no lower than 220V. If the breaker trips while using the washer, consider these steps to minimize voltage drop: - Avoid using an extension cord, as it can lead to reduced voltage. - Relocate the washer to a different power outlet that supplies more than 220 V (Voltage range: 220V-240V). - It is important that the restart after a power outage is done in the correct order: 1. Stop the pressure washer. 2. Turn on/replace the breaker. 3.Start the pressure washer.
- If there's a low voltage issue at a power outlet, consider relocating the washer to another outlet that's closer to the breaker box. This shorter distance can help increase the voltage.
-If using an extension cable it should be a 2,5mm² core cable.
-The voltage can also increase if you reduce the number of electrical devices connected to the same circuit.